02/46 00 190

What we do

Venturi scrubbers

 Designed to suit any process gas requiring particulate removal, the MikroPul Venturi scrubbers classic single venturi design offers maximum scrubber efficiency through the simple four stage unit.

The design of the MikroPul Venturi Scrubber consists of a "wet approach" venturi followed by a liquid entrainment separator. Dust laden gases enter the venturi and instantly make contact with the tangentially introduced scrubbing liquid swirling down the venturis converging walls.

At the venturi throat, the gas and liquid streams collide and the liquid breaks down into droplets which trap dust particles. This gas/liquid mixture passes through a flooded elbow, and enters the entrainment separator through a tangential inlet. Centrifugal action removes the heavy wetted particles from the gas stream. As an alternate, when very large diameter separators are required, the liquid is separated by passing the stream through a chevron-type mist eliminator baffle.

The dust/liquid mixture is discharged from the separator bottom drain and the cleaned gas leaves through the top of the separator.


    Up to 99%+ collection efficiency into submicron range
    Pressure drops from 2.5 - 15 kPa (10 - 60 in. w.g.)
    Adjustable venturi throat (manual or automatic)
    Liquid distribution by open pipes rather than nozzles
    Slurries with high solids can be recycled
    Handles high inlet gas temperatures
    No wet/dry line buildup
    Virtually maintenance free